5 Mistakes to avoid when cleaning the marble floor

Maintaining the characteristics of gloss and brilliance of a floor is by no means an easy task, given that each surface must be treated with suitable and non-aggressive products and, in cleaning, the abrasion resistance and porosity of the material must also be considered.

Marble, a metamorphic rock composed mainly of calcium carbonate, is apparently robust, but reality sees it as a material sensitive to wear, delicate, and easily opaque. This guide was created to illustrate 5 mistakes to avoid cleaning the floor to preserve it and keep it in all its integrity over time.

First of all, the first mistake that commonly risks damaging the beauty of the floor is traditional, abrasive detergents, not suitable for marble surfaces.

Traditional detergents, which can purchase in a supermarket or any generic and non-specialized point of sale, have abrasive chemicals and percentages of acid that attack and stain the marble, leaving halos and opacifying it from the first applications.

They are not designed and created for a specific surface, so to not disappoint the customer’s final expectations, they are very aggressive on dirt. Still, they do not take into account the conservation and delicacy of some materials.

The second mistake is to use generic or self-polishing polishing products. They are mixtures that promise you a perfect polish in a single pass but fail to explain that must use them for small surfaces.

In large areas such as a living room or a bedroom, there is a risk of applying non-homogeneous quantities of product, in some places too much wax in others too tight, with an unsightly final result.

Use the pumice powder, available in a hardware store, mixed with water, and rub the marble with a sponge or a microfiber floor cloth.

The third common mistake is the incorrect cleaning of obvious dirt. Avoid using spatulas, spatulas, scrapers, and cutters to remove the thick dirt stains, and you risk scratching the marble. Try making? Wrap? of a white sponge or a common plaster, wet and reduced to a pulp with the consistency of liquid cream, then cover the stains, persistent dirt, or the surface to be treated and leave it on for about 40 minutes.

The fourth mistake-absolutely to avoid are the? Grandmother’s remedies ?. Avoid using vinegar and lemon, orange, and ammonia, ingredients commonly used to create do-it-yourself surface cleaners.

They are substances with very acidic and corrosive properties, and the damage to the material could be really significant. Soapy water (Marseille) or hydrogen peroxide (for light-colored marble) are always suitable and effective for cleaning the floor.

Finally, the last mistake that absolutely to avoid is the timing of your cleaning. Clean the floor daily, avoid letting dust and other residues settle, and settle on your floor for a long time. In this way, you will avoid annoying lines and scratches due to carelessness.